PUR construction insulation board PURBLOCK 550

Structural insulation of thermal bridges made of recycled polyurethane based on hard polyurethane foams. It has high strength and resistance to pressure or mechanical load. Moisture-resistant, dimensionally stable and stable. It is easy to process. Possibility to mill, grind, drill, screw and laminate. Very simple gluing. Open for water vapor diffusion. 100% recyclable.

  • coefficient of thermal conductivity λ=0.076 (W/mK)
  • water vapor diffusion µ ≤ 12
  • volumetric weight: ~550 kg/m3
  • heat resistance – 50°C to +100°C
  • reaction to fire E, does not burn or drip
  • Maximum compressive stress ≥ 7000 kPa at 10% depressurization
  • Swelling thickness (after 24 hours of storage in water) 1.0%
  • dimensional tolerance +/-1%
  • resistant to aging, mold, rot and harmful insects
  • safe for health - they do not contain CFCs, HCFCs and formaldehyde

Choose a variant:

Starting at 30.00 €
excluding shipping cost

The main benefits:

  • thermal protection
  • extremely resistant to moisture, minimal absorption
  • does not show dimensional changes or deformation
  • increases the service life of windows and related structures
  • prevents overcooling and freezing
  • prevents condensing moisture around windows and window sills
  • high load capacity - up to 7 tons
  • volume stability
  • simple workability when installing windows - gluing, cutting,
  • resistant to chemicals
  • suitable for all types of windows and doors, including sliding HS portals
  • extremely resistant to moisture, minimal absorption

Technical parameters:

Kernel type Rigid polyurethane foam (PUR)
Cladding type it is not laminated
Density (EN 1602) kg / m3 550 ±50
Thermal conductivity (EN 12667) λ [W/mK] 0,076
Water vapor diffusion (EN 1607) µ ccc 12
Reaction to fire class (EN 13501-1) Euroclass E
Compressive strength at 10% compression (EN 826) [kPa] Ca 7000 kPa
Bending strength (plate thickness 15 mm) (EN 310) N/mm² 7,8
E-module N/mm² 500
Resistance to pulling out screws (4x60 mm) (EN 320) N 650
Swelling thickness (after 24 hours of storage in water) % 1,0
Water increase (after 24 hours of storage in water) % 5,0
Change in length depending on humidity mm/m ± 2
Residual moisture % 2,0 - 4,0
Board dimensions [mm] 2400 x 1350
Thickness [mm] 15 - 60
Surface polished
Edge equal

Usage:

  • universal use (damp and wet environments, bathrooms and kitchens, facades, installation of windows and doors, floors)
  • base profiles for facade and window constructions
  • at windowsills, blinds and flush-mounted blind boxes
  • with sandwich panels
  • extremely suitable for the construction of low-energy and passive houses
  • dividing walls in damp and wet areas
  • kitchen worktops, boat equipment, bathroom furniture,
  • construction of cars (e.g. residential, commercial cars, ships, wagons, etc.),
  • as a climatic layer to prevent the formation and action of a thermal bridge in the detail of the supply of the perimeter wall to the concrete part of the foundation during the construction of low-energy and passive houses
  • exhibition stands, building structures, gates and doors, kitchens,

PURBLOCK 550 is available as large format boards, full profiles and profiles with PUR insert. We can make extra-standard sizes and shapes to order.